HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

IPMI on HP Proliant DL360 Gen9

 
Ankit11
Occasional Contributor

IPMI on HP Proliant DL360 Gen9

Hi, 

I am trying to get sensor data via IPMI, when I am trying to connect to the machine I am getting below error.

$ ipmitool -H my_server_ip -I lanplus -U user -P password sensor list

Error: Unable to establish IPMI v2 / RMCP+ session
Get Device ID command failed
Unable to open SDR for reading

I have enabled the IPMI from iLO4 settings on port 623, frimware version is 2.50

Please help where I am doing wrong, did I miss any configuration. I am a newbie.

Thanks in advance!