ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ISO Image Through ILO

SOLVED
Go to solution
MT19
Valued Contributor

ISO Image Through ILO

Hi, is it possible to ILO into a server, mount an ISO image on it, and then boot that server off the ISO image? If so, can you detail the steps?
thanks,
mark
6 REPLIES
Raghuarch
Honored Contributor
Solution

Re: ISO Image Through ILO

You can connect a iso image and boot server from it. you have to use Virtual media function of iLO.

Refer to page 87 in the Below Doc.
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00209014/c00209014.pdf
KarloChacon
Honored Contributor

Re: ISO Image Through ILO

hi

yes you can it's pretty easy

which server? to know which ilo

you just select image and connect and check you r boot order in order to boot from CD

regards
Didn't your momma teach you to say thanks!
MT19
Valued Contributor

Re: ISO Image Through ILO

Thanks for the feedback, guys. There server is a DL360G4.
Raghuarch
Honored Contributor

Re: ISO Image Through ILO

I assume with the information given you were able to boot from the ISO right?
MT19
Valued Contributor

Re: ISO Image Through ILO

Yes, I was able to. Thanks guys!
MT19
Valued Contributor

Re: ISO Image Through ILO

Task was possible.