Ilo disable.

[luongson]

Hi karlo.
I have clearing NVRAM and enable ilo, but server boot slowing. I check version bios of server is HP Bios p54, i need to loading firmware for server, help me ? coming soon.

[KarloChacon]

ok try the firmware cd

http://h18023.www1.hp.com/support/files/server/us/download/27783.html

it is bootable cd

regards

[luongson]

Hi karlo.
I has cd hp SmartStart 7.90, firmware is bios in cd hpsmartstart 7.90 ?

[KarloChacon]

no that is another cd, that is for windows installation (OS instllation)

regards

[Vinicio Hidalgo]

I have a DL380 G4, I have no option on POST to enter f8. I upgrated the FW of the BIOS and iLO and now I have no prompt for ilo config. I updated using latest version and still nothing. iLO security switch procedure already done and the same. Someone with an idea...? Replace system board maybe?
Thanks

[KarloChacon]

hi Vinicio

Can you ping the IP for ilo? This in the case ilo was previously configured...

what do you see in management process system management homepage?

what about clear NVRAM?

regards - cool from Costa Rica

[Blazhev_1]

Hi,

If Karlo's suggestion don't solve it, try to
unplug the power cable, wait 1 min plug it again in and then power on the server ...this will completely reset the ilo and it must show up

Pac