ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Ilo2 Problem on DL380G6

XB_1
Occasional Visitor

Ilo2 Problem on DL380G6

Hi,

I have an issue on 3 DL380G6 :
When i try to start the server, fans start to run but stay at full speed.
After a loooonnnng time i get the screen and while the post operations, i get an error message : "Warning, Ilo 2 has been disabled ... "

I have make a lot of test but with the same result. (Bios update to 10/01/2009 version, reset Rom/nv ram, without cable in the Ilo)

I think it's a motherboard issue but if someone has an other solution ...
3 REPLIES
Johan Guldmyr
Honored Contributor

Re: Ilo2 Problem on DL380G6

Hi!

When you look under the PCI devices in BIOS, are the iLO interfaces disabled?

Are the interfaces found there at all?

If they are, then maybe unplugging the CMOS battery completely for a while might help out if the NVRAM clear did not fix it.
XB_1
Occasional Visitor

Re: Ilo2 Problem on DL380G6

I'm sorry the exact message is : "Ilo2 not responding ..."

And yes it is well enable in the Bios...
Johan Guldmyr
Honored Contributor

Re: Ilo2 Problem on DL380G6

Okay, how about the iLO firmware, have you tried to upgrade/downgrade that?