ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Insight Diagnostics stops at 94%

Florian Sicking
Occasional Contributor

Insight Diagnostics stops at 94%

Hi all,

I've a ML350 G4 here running Windows Server 2003 Std which reacts very slowly
after startup. I tried running HP Insight Diagnostics (Online Edition for
Windows, Version 7.9.0.2359) but it stops responding at 94% in the hardware scanning part.

Does anyone has an idea what might cause the issue(s)?
5 REPLIES
James ~ Happy Dude
Honored Contributor

Re: Insight Diagnostics stops at 94%

Hello Florian,
Try the Same with the Minimum configuration.
One Processor, no PCI, min Memory. See how it goes.

Also, Make sure the Server is on the latest Firmware & PSP.

Regards.
KarloChacon
Honored Contributor

Re: Insight Diagnostics stops at 94%

hi

I had similar issue with another type of server

just in case update Insight diagnostics

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3279707&prodTypeId=15351&prodSeriesId=397642&swLang=8&taskId=135&swEnvOID=1005#7832


if that does not work, yes follow Happy Dude recommendation

the issue I had was server needed System ROM firmware update

Regards
Didn't your momma teach you to say thanks!
KarloChacon
Honored Contributor
Florian Sicking
Occasional Contributor

Re: Insight Diagnostics stops at 94%

Hi,

@Happy Dude: Ok, I gonna try it and let you know how it went.

@Karlo: System ROM firmware update is another good point! Gonna try it as well...

Thanks to both of you! Btw, it might take some time to perform the steps as I'm quite busy currently. However, I'll surely come back to you and post my feedback.

Regards,
Florian
KarloChacon
Honored Contributor

Re: Insight Diagnostics stops at 94%

hi

that's fine
take your time and let us know the results

regards
Didn't your momma teach you to say thanks!