Solved: Install HPE Custom Image VMware ESXi 6.0 U3 on DL3...

kiddwong · ‎01-15-2018

Dear Support,

I am typing to install HPE Custom Image VMware ESXi 6.0 U3 on DL380 Gen 10 but getting error.
Attached the error screenshot during Esxi Installtion. Below is the server spec.

DL380Gen10 with Intel(R) Xeon(R) Gold 6130 CPU @ 2.10GHz / 128GB Memory
SAS HDD - RAID1 500GB
HPE Smart Array P408i-a SR Gen 10 with firmware version : 1.04

Can anyone help on this issue?

Regards,
Kidd

Erdogan Temur · ‎01-16-2018

Hello,

Update the Server with latest BIOS & ILO and controller card firmware

https://support.hpe.com/hpesc/public/home/driverHome?sp4ts.oid=1010026819

Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.

kiddwong · ‎01-17-2018

Thank you for your reply.

We have fixed the issue by mounting ISO file as below way iLO.
iLO Integrated Remote Console > Virtual Drives > Image File > ISO File

I am getting this error message during installation via the below way.
iLO Integrated Remote Console > Virtual Drives > Folder > ISO File

Thanks
Kidd

Install HPE Custom Image VMware ESXi 6.0 U3 on DL380 Gen 10 getting error

Install HPE Custom Image VMware ESXi 6.0 U3 on DL380 Gen 10 getting error

Install HPE Custom Image VMware ESXi 6.0 U3 on DL380 Gen 10 getting error

Re: Install HPE Custom Image VMware ESXi 6.0 U3 on DL380 Gen 10 getting error

Re: Install HPE Custom Image VMware ESXi 6.0 U3 on DL380 Gen 10 getting error

Re: Install HPE Custom Image VMware ESXi 6.0 U3 on DL380 Gen 10 getting error

Re: Install HPE Custom Image VMware ESXi 6.0 U3 on DL380 Gen 10 getting error

Hewlett Packard Enterprise International