Install OS in Proliant ML150G5

[RobertDP_1]

Hi,

I need to install Windows Server OS in my Proliant ML150G5 server, I only have one SAS HDD (Hot Plug), since this device works with a PCI-Express Interface for SAS hard drives (LSI) the setup is not recognizing the HDD.

Any suggestions?

I will appreciate it

[KarloChacon · Accepted solution]

hi

which OS? W2003? W2008?

which specific controller?

regards

[RobertDP_1]

It's Windows Server 2003 and the interface is a SATA/SAS Card adapter in a slot of PCIEx
(1-4 bays for Hot Plug HDD are connected to this adapter)

[RobertDP_1]

The controller for the HDD is the HBA: HP SC40Ge 4 Internal Port SATA/SAS Host Bus Adapter

Thanks in advance for any help!

[KarloChacon]

you must use this driver either using a USB floppy unit or using nlite (search on google or here in forums)

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3580609&prodNameId=3580646&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-fbddb54c93334c36a218a051c7


regards

[RobertDP_1]

Thanks a lot for your help!

I integrated the driver with the Windows Server 2003 using nLite software.

The OS is now working Ok!