ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Install OS in Proliant ML150G5

SOLVED
Go to solution
RobertDP_1
Occasional Visitor

Install OS in Proliant ML150G5

Hi,

I need to install Windows Server OS in my Proliant ML150G5 server, I only have one SAS HDD (Hot Plug), since this device works with a PCI-Express Interface for SAS hard drives (LSI) the setup is not recognizing the HDD.

Any suggestions?

I will appreciate it
5 REPLIES
KarloChacon
Honored Contributor
Solution

Re: Install OS in Proliant ML150G5

hi

which OS? W2003? W2008?

which specific controller?

regards
Didn't your momma teach you to say thanks!
RobertDP_1
Occasional Visitor

Re: Install OS in Proliant ML150G5


It's Windows Server 2003 and the interface is a SATA/SAS Card adapter in a slot of PCIEx
(1-4 bays for Hot Plug HDD are connected to this adapter)
RobertDP_1
Occasional Visitor

Re: Install OS in Proliant ML150G5

The controller for the HDD is the HBA: HP SC40Ge 4 Internal Port SATA/SAS Host Bus Adapter

Thanks in advance for any help!
KarloChacon
Honored Contributor

Re: Install OS in Proliant ML150G5

you must use this driver either using a USB floppy unit or using nlite (search on google or here in forums)

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3580609&prodNameId=3580646&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-fbddb54c93334c36a218a051c7


regards
Didn't your momma teach you to say thanks!
RobertDP_1
Occasional Visitor

Re: Install OS in Proliant ML150G5


Thanks a lot for your help!

I integrated the driver with the Windows Server 2003 using nLite software.

The OS is now working Ok!