Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Install RHEL6 on DL380p Gen8

Righthanded
Frequent Advisor

Install RHEL6 on DL380p Gen8

Hi All,

 

This is urgent. I am stuck at the first step of installation RHEL6 on HP DL380 Gen8. It seems cant found the installation media using the Intelligent Provisionning.

 

I have tried to install manually, but suddenly RHEL6 cant detect the driver for the media.

 

 

Anyone have the installation guideline for installing rhel6 on dl380p gen8?

 

Thanks!

7 REPLIES
Righthanded
Frequent Advisor

Re: Install RHEL6 on DL380p Gen8

DO I have to deploy the driver first?ANyone?
PGTRI
Honored Contributor

Re: Install RHEL6 on DL380p Gen8

hi,

 

Please disable the VID (Virtual Install Disk) in RBSU and try again.

 

Thanks

 

regards,

How to Say Thank You? Just click the KUDOS!
Jimmy Vance
HPE Pro

Re: Install RHEL6 on DL380p Gen8

RHEL 6.1 is the minimum supported version on this system. 

 

http://h18004.www1.hp.com/products/servers/linux/supportmatrix/rhel/exceptions/rhel-exceptions.html#DL




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Righthanded
Frequent Advisor

Re: Install RHEL6 on DL380p Gen8

I am able to run the installation media after updated the firmware.

However, i still not able to see the disk which i made with raid 6.

It seems can't detect the storage array controller driver.

how would it be done?
Jimmy Vance
HPE Pro

Re: Install RHEL6 on DL380p Gen8

What version of RHEL are you trying to install? If it is RHEL 6, it won't see the disk, you need to use at least RHEL 6 update 1




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Righthanded
Frequent Advisor

Re: Install RHEL6 on DL380p Gen8

RHEL 6.0 for servers. SO do I have to download new ISO? Or there is a way to deploy Update 1
Jimmy Vance
HPE Pro

Re: Install RHEL6 on DL380p Gen8

You can update a running system to 6.1, but for a new install, you need to download the 6.1 .ISO image as the boot initrd has all the newer drivers in it.

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!