ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Install Ubuntu server in HP Proliant G20 Gen9 use Smart Array B140i

 
Alex_y
Occasional Visitor

Install Ubuntu server in HP Proliant G20 Gen9 use Smart Array B140i

Hello !!

 Tell me please, how install Ubuntu server OS and configure RAID 1  use internal Smart Array B140i in this server?

I`m try, but when install system installer not see logical volum which I configured in the internal utility , see two hard drive.

3 REPLIES 3
Jimmy Vance
HPE Pro

Re: Install Ubuntu server in HP Proliant G20 Gen9 use Smart Array B140i


@Alex_y wrote:

Hello !!

 Tell me please, how install Ubuntu server OS and configure RAID 1  use internal Smart Array B140i in this server?

I`m try, but when install system installer not see logical volum which I configured in the internal utility , see two hard drive.


You have to set the contoller to AHCI mode as there is not a RAID driver available for this controller for Ubuntu.  You can look at using HPE Linux Software Raid Redundant Boot method https://downloads.linux.hpe.com/SDR/project/lsrrb/ This allows you to use Linux RAID but have both drives able to boot the OS in the event of a primary drive failure

 

No support by private messages. Please ask the forum! Accept or KudoI work for HPE
Alex_y
Occasional Visitor

Re: Install Ubuntu server in HP Proliant G20 Gen9 use Smart Array B140i

the link you sent me, does not open. if I understand correctly, raid 1 make software using mdm utility?

Jimmy Vance
HPE Pro

Re: Install Ubuntu server in HP Proliant G20 Gen9 use Smart Array B140i

an extra character or space got added to the link, try again

No support by private messages. Please ask the forum! Accept or KudoI work for HPE