ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Install Win2008 R2 on HP ProLiant DL360 G3

 
SOLVED
Go to solution
jag2050
Frequent Advisor

Install Win2008 R2 on HP ProLiant DL360 G3

Hi above server is with 4GB RAM, 32 bit hardware.

Can I install Win2008 R2 (64bit) on this server. Will it easy to install with no problems?

Thanks
Jag
6 REPLIES
Michal Kapalka (mikap)
Honored Contributor

Re: Install Win2008 R2 on HP ProLiant DL360 G3

hi,

if the CPU is not 64 bit capable, you will be not able to install the Win 2008 R2.

mikap
jag2050
Frequent Advisor

Re: Install Win2008 R2 on HP ProLiant DL360 G3

Thanks for prompt response,

is there a way to know that CPU is 64 bit enabled or not?

Thanks
J
Michal Kapalka (mikap)
Honored Contributor
Solution

Re: Install Win2008 R2 on HP ProLiant DL360 G3

hi,

in the quick spec on the HP site should be defined which CPU are supported , check the site :

http://h18000.www1.hp.com/products/quickspecs/11504_na/11504_na.HTML

if you know which CPU is inside the sewrver just check the CPU information on intel.

mikap
jag2050
Frequent Advisor

Re: Install Win2008 R2 on HP ProLiant DL360 G3

Processor in the server is 4 Intel(R) Xeon(TM) CPU 2.80GHz.

is this the correct place to double check?
http://www.intel.com/p/en_US/support/highlights/processors/xeon
jag2050
Frequent Advisor

Re: Install Win2008 R2 on HP ProLiant DL360 G3

Hi,

This is the page:

http://www.intel.com/support/processors/xeon/sb/cs-007755.htm

but I am unable to see/find that if its 64bit enabled or not. Could you help please?

Thanks
Jag

Re: Install Win2008 R2 on HP ProLiant DL360 G3

All CPUs for HP ProLiant DL360 G3 support 64bit. See http://h18000.www1.hp.com/products/quickspecs/12476_div/12476_div.pdf in the end of page 4.