HPE Community
ProLiant Servers (ML,DL,SL)
1753781 Members
7280 Online
108799 Solutions
New Discussion юеВ

Re: Install Windows NT in DL320 G3

 
Matteo_italy
Frequent Advisor

тАО06-09-2006 03:32 AM

тАО06-09-2006 03:32 AM

Install Windows NT in DL320 G3

Hi to all,
i must install Windows NT in a new server (HP DL320 G3) because i will do a migration domain NT to 2003.
The SmartStart 7.20 write that is no possible because the system is no supported.
How i can do to install Windows NT in this server?
0 Kudos
Reply
2 REPLIES 2
Igor Karasik
Honored Contributor

тАО06-09-2006 04:50 AM

тАО06-09-2006 04:50 AM

Re: Install Windows NT in DL320 G3

Matteo,
The real problem here is not SmartStart (you always can install OS without SmartStart), but DL320 G3.
DL320 G3 doesn't support NT (AFAIK no NT drivers).

You can install windows 2003 + Virtual server 2005/or VMware and install NT4 as guest OS.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО06-09-2006 05:00 AM

тАО06-09-2006 05:00 AM

Re: Install Windows NT in DL320 G3

You won't find any drivers.

The idea to use vmware is a good one and seems to be the only way.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.