ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Installaing W2008 R2 on a HP ML 150 G6

SOLVED
Go to solution
MacGeyer
Occasional Contributor

Installaing W2008 R2 on a HP ML 150 G6

Hi,

I try to use Easy Set-up CD (v1.00 B) to install W2008 R2 64 bits, but my HP DVD is never recognized whenever I choose HP branded or not.
I already had the same problem while installing SBS 2008 on a ML 150 G6.
Is this Easy Set-up CD realy working ?
3 REPLIES

Re: Installaing W2008 R2 on a HP ML 150 G6

Hi,

Easy Set-up CD can be used for smart array controller card.Because, Onboard controller card does not support.

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Regards.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
MacGeyer
Occasional Contributor

Re: Installaing W2008 R2 on a HP ML 150 G6

Using V2.00 should solve this issue but I can't understand why HP's products aren't tested better than this.
Delivered CD is really useless, it can't be used to install W2K8 and it can't be used to load B110 driver because it's buggy.

Thanks HP!