HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Installation DL380 G5

 
SOLVED
Go to solution
David Didier
Occasional Visitor

Installation DL380 G5

Good morning all,

When I boot my server with the CD "SmartStart 7.40" from an external CD drive, I have a problem to see all the information.

Some information are not displayed correctly and are replace by red cross.

Do you know what I have to do?

Thank you
7 REPLIES
KarloChacon
Honored Contributor
Solution

Re: Installation DL380 G5

hi David

you definitely have a very old version for smartstart 7.40..

use this one

Latest one 8.0

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121516&prodNameId=3288134&swEnvOID=4022&swLang=8&mode=2&taskId=135&swItem=MTX-380a6a0f53ea4a9ab8bfe8b554

try that and let us know

regards
Didn't your momma teach you to say thanks!
David Didier
Occasional Visitor

Re: Installation DL380 G5

Thank you Karlo,

I am downloading the version of smartstart you gave me.

Another question:

I have created a logical disk Raid 6 with 546,8 GB size. But Smartstart doesn't recognize it!

I have the followings errors:
-Boot controller : unknown device 3230
-Boot controller : Disk Size 0

Where do I have to go to finish the installation of the raid 6.

Thank you
KarloChacon
Honored Contributor

Re: Installation DL380 G5

hi

how you configured that RAID 6? using that old smartstart? or using ORCA option during POST?


something else where are you seeing this:
-Boot controller : unknown device 3230
-Boot controller : Disk Size 0
???

regards
Didn't your momma teach you to say thanks!
KarloChacon
Honored Contributor

Re: Installation DL380 G5

hi again

I forgot if you used Smartstart 7.4 to configure your RAID It is much better if you use 8.0

regards
Didn't your momma teach you to say thanks!
David Didier
Occasional Visitor

Re: Installation DL380 G5

Hi again,

I use ORCA option to configure RAID6.

I saw these erors in SmartStart old version (I am downloading the new one)

-Boot controller : unknown device 3230
-Boot controller : Disk Size 0

Best regards
David Didier
Occasional Visitor

Re: Installation DL380 G5

Thank you very much,

it's ok with a smartstart version 7.90

Best regards.
David Didier
Occasional Visitor

Re: Installation DL380 G5

With smartstart 7.90 it's ok