ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Installation Solaris on Compaq Proliant 3000

Vladimir Bogomolov
Occasional Visitor

Installation Solaris on Compaq Proliant 3000

I have a problem with Solaris 9 x86 platform edition installation,
I have Compaq Proliant 3000 server.
When I boot from CD-ROM, in the point where it wants to prepare disk for installation, create partitions, ...., following messages appears.

Scanning system disk information...
./W00. findswap[2]: ((11*1024*2)+0-1)/0: divide by zero
./W00. Findswap[967]: 0*: more tokens expected

Where could be the problem? Thanks for advise.
1 REPLY
Ozan GUNAYDIN
Frequent Advisor

Re: Installation Solaris on Compaq Proliant 3000


Hi,
raid configuration of the server can cause that problem.

Are you sure the setup has the driver of the raid card your server has?

If it has the driver, you have to be sure that the firmware version of the card is same with the driver version.