Installation of NVIDIA QUADRO RTX 4000 GRAPHICS ACCELERATOR in HPE PROLIANT DL360G10

[anida-tmontano]

Hello everyone

I need to install a NVIDIA QUADRO RTX 4000 GRAPHICS ACCELERATOR P/N: R1F95C in a HPE PROLIANT DL360 GEN10 server

Is there an installation document? or some installation video for reference

Thanks

[support_s · Accepted solution]

System recommended content:

1. Advisory: HPE ProLiant ML110 Gen10 Server - Update the Server to System ROM Version 2.14 (or Later) and HPE Integrated Lights-Out (iLO) to Firmware Version 1.43 (or Later) Before Installing the NVIDIA Quadro RTX4000 GPU Graphics Option

2. NVIDIA Accelerators for HPE ProLiant Servers - Overview

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Suman_1978]

Hi,

Firstly, please refer to the Server QuickSpecs. check the card compatibility and requirements.  Page#56.

There are couple of documents available, depending on where or which slot you are installing the card.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases