Installation problem

[Jalil_2]

I have Proliant ML350 G3 and i want to install on it microsoft small business server 2003. i boot from a RAID array controller 642.
i have everything installed ( the driver of the raid controller, CD bootable)..
when it boots it shows me this message " SCSI bios installed". i think, in order to solve this i should disable in the BIOS " bootig from SCSI controller".
when i put the disk 1 of SBS 2003, it begins to install and it fails saying " there is no drives". where is the problem please ?

[Roger Faucher]

Jalil:

There is a point early in the installation where a message appears in the status line at the bottom of the screen saying to press F6 to load disk drivers (or words to that effect). Press F6 at that point and feed the appropriate drivers to the install program.

HTH

Make a great day!

Roger

[Prashant (I am Back)]

Hi,

This will do.

http://h18007.www1.hp.com/support/files/server/us/locate/20_4678.html

Regards,
Prashant S.

[Jalil_2]

Hi Roger,
I did this and i put the driver that i have got from the SmartstartCD 6.4B.
but i recieve alaws this problem .

help, please.

[Vijay_44]

Have you configured an Array? When the array controller initilises on POST does it report a logical drive? if not you have to configure the controller using the ACU in the smart start or the ROM based ACU from F8 of the controller.

[Roger Faucher]

Jalil:

Don't use the drivers from SmartStart 6.4 if there are newer ones here:

http://h18023.www1.hp.com/support/files/server/us/locate/69_4678.html

Don't use the link Prashant posted, he inadvertently gave you the Windows 2000 link. (It nice to know he's human, too. It's the first mistake I've seen him make.) ;^)

Roger