ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Installing Compaq Power Management

Ayman Altounji
Valued Contributor

Installing Compaq Power Management

I installed the server with Netware 3.12, after this, applied the 3.2 upgrade patch.

When I tried to install the Compaq Power Management Software, following the instructions on the CD, I receive the following message:

NWSNUT-4.10-47 This NLM contains no messages.

And the installation process does not begin.

I downloaded the latest Nwsnut.nlm supplied from Novell for Netware 3.12 and did not work.

Thanks for your solution.
Ayman Altounji
Valued Contributor

Re: Installing Compaq Power Management

Take the managment cd copy over the netware power managment sw into a folder in sys:system you can call it anything - try CPQCPM. If you try to load sys:system\cpqcpm\cpmsetup.nlm you will get the above error. Some problem with nwsnut.nlm similar issues with the nssd install. Just copy cpmsetup.nlm directly form cpqcpm to the root of sys:system. At the console load cpmsetup.nlm and it works fine.