HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Installing HP PCI-X dual channel HBA in DL380G3

 
kenny chia
Regular Advisor

Installing HP PCI-X dual channel HBA in DL380G3

Hi all
I have a configuration problem for the LSI Logic / Symbios Logic|53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI card
The system is a Red Hat AS2.1/DL380G3

The card and the tape drive was detected by the BIOS during bootup
The card was detected as a new hardware by RedHat Kudzu and configured

But the tape drive cannot be accessed
# cat /proc/scsi/scsi
Attached devices: none

# modprobe mptbase mptscsih ciss
/lib/modules/2.4.9-e.3smp/kernel/drivers/message/fusion/mptbase.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.4.9-e.3smp/kernel/drivers/message/fusion/mptbase.o: insmod /lib/modules/2.4.9-e.3smp/kernel/
drivers/message/fusion/mptbase.o failed
/lib/modules/2.4.9-e.3smp/kernel/drivers/message/fusion/mptbase.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.4.9-e.3smp/kernel/drivers/message/fusion/mptbase.o: insmod /lib/modules/2.4.9-e.3smp/kernel/
drivers/message/fusion/mptbase.o failed
/lib/modules/2.4.9-e.3smp/kernel/drivers/message/fusion/mptbase.o: Can't locate module ciss

# cat /etc/modules.conf
alias parport_lowlevel parport_pc
alias scsi_hostadapter cciss
alias eth0 tg3
alias usb-controller usb-ohci
alias scsi_hostadapter1 mptbase
alias scsi_hostadapter2 mptscsih
alias scsi_hostadapter3 mptscsih

Any ideas what could be wrong?
All Your Bases Are Belong To Us!