ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Installing NT 4.0 w/ dual P III 1Ghz processors

Ayman Altounji
Valued Contributor

Installing NT 4.0 w/ dual P III 1Ghz processors

As I install NT 4.0 every thing seems to be running fine until I get to the final reboot of the installation process. I then get a blue screen with "CPUID;GeniuneIntel 6.8.6 irgl:1f SYSVER 0xf0000565" The Rompaq's and device settings are correct.

How do I reslove this issue?
1 REPLY
Mark Cloutier
Respected Contributor

Re: Installing NT 4.0 w/ dual P III 1Ghz processors

firstly are both processors the same cache size? mixed cache size is unsupported..secondly if this isnt an issue then its the stepping on your processors..the proc with the higher stepping needs to be in slot one...if they have the same cache size then swap the procs around and reboot...
We are here for a good time, not a long time!