ProLiant Servers (ML,DL,SL)
1748230 Members
3996 Online
108759 Solutions
New Discussion юеВ

Re: Installing SBS2003 with SP1 & Proliant ML350G4

 
Juan_50
Occasional Contributor

Installing SBS2003 with SP1 & Proliant ML350G4

When I try to install SBS2003 in ML350G4 (SCSI server) doesn┬┤t finish the installation and appears BSOD with the following message:
"BAD_POOL_HEADER 0x00000019"
Anybody knows how can I solve this problem?
I suspect of Microsoft SP1 but I have no way for test it with other OS without SP1.
Any idea?
Thank you in advance
2 REPLIES 2
simon_164
Super Advisor

Re: Installing SBS2003 with SP1 & Proliant ML350G4

Juan;
i don't know how are u installing the OS,
but try to install it using Smart Start 7.20.
Before installation do the test from the CD maintenace tab.
If you want to upgrade the firmware of the server; try to get the latest one, use the firmware upgrade CD and then retry the installation;

Regards,
Terry Hutchings
Honored Contributor

Re: Installing SBS2003 with SP1 & Proliant ML350G4

I've done an install of SP1 within Windows on one of these servers and also installed a slipstreamed version with a clean install. Both were successful.

How much memory do you have installed and is it all HP memory?

I've seen reports of certain network cards causing this problem also.
The truth is out there, but I forgot the URL..