ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Installing a Single Channel Ultra320 SCSI Host Bus Adapter/DL380G4

Mark Gibson_4
Occasional Contributor

Installing a Single Channel Ultra320 SCSI Host Bus Adapter/DL380G4

Is installing this part as simple as phyiscally installing the hardware. Does Win2K3 have the required drivers, etc?
3 REPLIES
Brian_Murdoch
Honored Contributor

Re: Installing a Single Channel Ultra320 SCSI Host Bus Adapter/DL380G4

Hi Mark,

Yes it should be straightforward.

The latest drivers are here if you need them (April 2006).

http://h18023.www1.hp.com/support/files/server/us/download/23394.html

Brian
Mark Gibson_4
Occasional Contributor

Re: Installing a Single Channel Ultra320 SCSI Host Bus Adapter/DL380G4

Should I connect my DAT72x6 to the card before I power on the server after card installation? I currently have this device on the same scsi chain as my hard drives. By installing this card I can place the 72x6 on an external scsi bus thus enabling the changer to work.
Brian_Murdoch
Honored Contributor

Re: Installing a Single Channel Ultra320 SCSI Host Bus Adapter/DL380G4

Hi Mark,

Yes, attach the changer and power it on before powering on the server. When the controller initialises you will see it performing a SCSI bus scan and be able to check that it has found the changer (robot) and DAT72 drive during the scan.

Regards,

Brian