Installing an additional SCSI Card

[IUbasketball]

Installed and Adaptec 3960 card for the tape backup unit. It is recognized and installed, but, as well as the onboard NVDIA card, but, after it gets past the F10/F12 option screen it stops. Doesn't get to windows 2003 sbs. When I take the card out, it works fine. This card and tape drive worked fine in the DELL I took it out of. THANKS!

[cnb]

>Installed and Adaptec 3960 card for the tape backup unit

Server Model? Tape unit model? F/W versions?
IML logs?

Just because a card works in a DELL doesn't mean it's supported in an HP/Compaq Proliant.

Not a lot of information. So you won't get much help.

See this link:
http://66.34.90.71/ITRCForumsEtiquette/index.html

[IUbasketball]

Server is an ML115 G5 with an on-board array controller for a raid5 setup. Tape drive is an HP, but, I disconnected the tape drive and still get the same issue, so it isn't the tape drive, but some setting, somewhere where the scsi card and NVDIA controller are conflicting.

[Richard W.]

IO address / Port / turn off the BIOS on the SCSI card, maybe ?