ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Installing third party video cards

Ayman Altounji
Valued Contributor

Installing third party video cards

Using a Prioliant 800 as a development machine. Tried to install a third party video card (ATI All in Wonder 32MB) but upon booting, the screen is black and nothing appears, even the BIOS doesn't show up. Was able to use a real old legacy video card (4MB) but cannot get the newer cards to work. I know these are servers and yadayadayada but come on...

Any suggestions will help.
1 REPLY
Mark Cloutier
Respected Contributor

Re: Installing third party video cards

try to disable the onbaord video first..(locate the 6 bank dip switch on the system board and put switch 1 in the on positon) if this doesnt work and an old vid card does then it is either the card you are trying or the drivers..
We are here for a good time, not a long time!