Intelelligent Proviionning Issue Proliant ML30 Gen9

[NACIM]

Hello ;

I have somme problem with my server ,so i can't use the Intelligent Provisionning when i put F10 the processe of the booting ip bloc and i have a message

Intelligent Provisionning     ............................ waiting for ILO to Response

ILO il V 2.50

IP V3.0.0

Thnaks

[PiterParker]

Hi m8, 

Try to load the firmware if  that not helpo you could reflash intelligent provisionin

http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_fc0da6c6b63c46c883293a4dc6

Regards, 

Piotr

[NACIM]

he Piter

thank for your replly ,i try your suggestion and i return to you

[Torsten.]

Connect to ILO and select diagnostics page. Any yellow mark there?

IP image is here:

http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_77b94511492441a08eb272ed27

Version 2.61 for Gen9

Consider to upgrade ILO to version 2.55, if not already done.

[NACIM]

Hi Piter ;

The update to V2.50 is failed look pictor error

thanks you

[NACIM]

HI Torsten

I can not connect to the ilo and i hav a post that ILO 4 IPV 4 is desabled ,so how to update ILO TO V2.55 with the .Bin fil

Thnaks

[Torsten.]

You can only try a complete power cycle (pull the plugs).

Otherwise you need to contact HPE support for a new board.