ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Intelligent Provisioning Firmware Update not working

 
Torsten.
Acclaimed Contributor

Re: Intelligent Provisioning Firmware Update not working

Bundle for use with HP SUM:

version 2.50 (Gen9):

http://downloads.linux.hpe.com/SDR/repo/ip/sles/current/x86_64/gen9/

version 1.63 (Gen8):

http://downloads.linux.hpe.com/SDR/repo/ip/sles/current/x86_64/gen8/


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Dan_CA
Occasional Visitor

Re: Intelligent Provisioning Firmware Update not working

Has anyone been able to uptade firmware with this latest version (2.50) of Intelligent Provisioning ?

Torsten.
Acclaimed Contributor

Re: Intelligent Provisioning Firmware Update not working

I prepared an SPP 2016.10 USB stick with the bundle above and I hope I can test this in the next few days.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
isolated_1
Occasional Visitor

Re: Intelligent Provisioning Firmware Update not working

Hello Everyone,

I was encountering the same problem with my new DL380 Gen9 server not being able to contact the update server. I was on IP 2.40. 

I want to report back that the issue has been resolved, at least in my case, after upgrading to IP 2.50. On 2.40, neither DHCP nor static IP helped. Putting iLO onto the same network as my management didn't work either. 

Hope this helps!

wstoll
Visitor

Re: Intelligent Provisioning Firmware Update not working

IP recovery 2.50 for Gen9 and 1.64b for Gen8's, both the latest and greatest are broken!

Niether will allow you to perform a Firmware Update from within IP. I have this is a closed System, with no access to the outside world. It "greys out" the Firmware Update section and you have to boot from an offline SPP kit to upgrade Firmware. Makes IP pretty useless!

Torsten.
Acclaimed Contributor

Re: Intelligent Provisioning Firmware Update not working

IP needs to get the firmware from either a local source or hpe.com, it is not included.
you may set up a local repository - this is more or less what OneView does.
however, IP is used for Provisioning and maintenance, fw update is IMHO not the primary purpose.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
GregDrive
Occasional Visitor

Re: Intelligent Provisioning Firmware Update not working

I am not sure how many HP servers that I have had but this has been the most annoying issue.

Loading Windows 2016 Standard Core on a ProLiant MicroServer Gen8.  The firmware was on 1.63 and it needs to 1.64 for Windows 2016.


I got a run time error trying to update the firmware through IP, and a BMC unresponsive when loading from the flash drive.

The solution to my issue was plug the ILo port in as I only had the NIC1 plugged in.  I have had a lot of HP Server dating back to 2000 and this is the first time that I had to have the ILo port in use.  Live and Learn and I hope this post helps someone.

BOYAN BIANDOV
Regular Advisor

Re: Intelligent Provisioning Firmware Update not working

I can not agree more. These are boxes at the price point of a used Honda Civic yet we have to deal with defects that never before existed in the pre-HPE merger quality control times. IMHO this is an embarrassment to a company which was once an iconic server maker!

Robenildo
Occasional Visitor

Re: Intelligent Provisioning Firmware Update not working

After update "42493_001_Intelligent_Provisioning_2.50-HPIP250.2016_1015.169.iso" the Intelligent Provisioning did update successfully from the HP website.

BOYAN BIANDOV
Regular Advisor

Re: Intelligent Provisioning Firmware Update not working

@Robenildo de Oliveira Thanks and good to know. I will try it ASAP. Thanks for posting the actual ISO file name. That's very helpful!

PatChannel
Visitor

Re: Intelligent Provisioning Firmware Update not working

I cannot seem to get Intelligent Provisioning updated at all. 

I've tried through IP Maintenance, after clicking the button to update, an error "TypeError:nessieinventroy is undefined" & "flash,js:233" is returned.  I've used both DHCP and static addresses.

I've tried to boot with the ISO for IP update.  It boots into IP Recovery, Then after communicating with iLO, "Error Flahing NVRAM" is displayed and then reboots

I've tried to boot with the SPP.  It attemps to boot to the CD, but fails.  The first time using the same dvd, it tried to boot with Linux.

Any help?

 

BOYAN BIANDOV
Regular Advisor

Re: Intelligent Provisioning Firmware Update not working

I can confirm that on Gen 9 (those are the IP 2.x) HPIP250.2016_1015.169.iso does work. 

@PatChannel your error seems to indicate defective hardware; I would get a case going with HPE and if you're under contract imho they would likely swap the mobo

Thanks

~B