Intelligent provisioning and smb setup problem when I Try to Instal 2019 evaluation

[Adricharlie]

Hello everyone,
sorry for my english.
I'm trying to install 2019 evaluation in my two new HP ML360Gen10, but with Intelligent provisionig after I entered in IP and created raid 5 and started the OS installation process, once the OS install started it throws an error saying that

WINDOWS CANNOT FIND THE MICROSOFT SOFTWARE LICENSE TERMS. MAKE SURE THE INSTALLATION SOURCES ARE VALID AND RESTART THE INSTALLATION.

After I tried SMB ,but it showed me an error:
"We see storage volumes, but the controller or the disks themselves are reporting errors. You will not to be able to install an Os at this time. You can use The Hardware validation Tool on the following pages to diagnose the problem".
I used the HVT tool and no problem showed me.
I used the Intelligent Storage configuration and showed me that
"No controllers Found. If there are controller installedand detected, possibly the server has not completed POST, please come back to this page after POST".
But the controller exist! I Have a RAID 5 with 8Hdd.Please

Please Can You help me? thanks

[Rhythm596]

Hi @Adricharlie , 

Have you to tried to restart and reinstall after POSt completion as the error message suggests? If yes, was the outcome same?

If yes, please try the following steps and try installation again:

1. Reseat the storage controller 

2. Recreate RAID 

3. Restore default manufacturing settings

From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Default Options > Restore Default Manufacturing Settings and press Enter.

Select a setting and press Enter. No, cancel the restore procedure. Yes, restore the default settings.

Press Enter.