HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Intergrated Smart Array Controller

 
James Stovall
Occasional Visitor

Intergrated Smart Array Controller

I have a Compaq DL360 that I am trying to get set up....the array controller will not detect the drives. I have updated the firmware for the controller and the BIOS. I'm using smartstart server 5.10...the array firmware is 1.50...can anyone assist?
3 REPLIES
Robin_37
Trusted Contributor

Re: Intergrated Smart Array Controller

Check the SCSI Blackplane Board.
Gus Kwong
Respected Contributor

Re: Intergrated Smart Array Controller

Agree with Robin, but you can also try reseting the NVRAM --- worked for me last time.

Cheers,
Learning never ends
Mark_475
Occasional Advisor

Re: Intergrated Smart Array Controller

if your DL360 a G2 or G3 you may need to have at leasr a smart start 6.0 for your installation. smart start 5.10 may not have the driver for your controller.