ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Interim Recovery after moving drive from another server to HP DL380 G5

Suede2016
Occasional Visitor

Interim Recovery after moving drive from another server to HP DL380 G5

Hi,

we have moved a drive from another server to an HP DL380 G5 but the old drive (which is not in place) is left and showing up in ACU with status failed as a 0 GB SAS HDD. The status of the Logical Drive (Raid 1) is Interim Recovery Mode and I did not get the question after moving the hard drive if the configuration should be deleted.

I always updated server BIOS, firmware of P400 but the problem still exists. Have added another drive wihich is now unassigned but I am unable to add it to the array or add it as a hot spare because the starus is Interim Recovery.

I have added the config from the ACU CLI.

Regards

Maik