ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Intermittant Smart Array Initialization Problems

Ayman Altounji
Valued Contributor

Intermittant Smart Array Initialization Problems

I'm having and issue with my Proliant 5000 specifically with the Smart 2/P disk array (it has four drives). Upon bootup it says it initializes the array okay but then wants to go into the system setup. In the setup it says that there were errors and that my system needs to be reconfigured before I can proceed. I do that and everything's fine until it reboots and it wants to do it all over again. If I go into the system diagnostics instead I and run a diagnostic it says it has trouble initializing the array. If from the diagnostics menu I do a power supply reset then the system will boot perfectly with no errors until the next reboot. Any suggestions? If you need more info please let me now. Thanks in advance.