HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Intermodule Bus Error, error code 0x0 on DL380 G3

 
SOLVED
Go to solution
Mark J. Francisco
Frequent Advisor

Intermodule Bus Error, error code 0x0 on DL380 G3

Does anyone know if replacing the PCI Riser cage will clear a Intermodule Bus Error, error code 0x0 message on a DL380 G3? Is there any other suggestions? Thanks!
5 REPLIES
srinath raju
Advisor

Re: Intermodule Bus Error, error code 0x0 on DL380 G3

Hi Mark,Have you made any hardware changes and if so what are the changes.If not since when are you getting this error message and at what point of starting the server.

Regards

Srinath
srinath raju
Advisor
Solution

Re: Intermodule Bus Error, error code 0x0 on DL380 G3

Hi mark,

By updating the System ROM fixes the problem.downloade from the following URL:

http://h18007.www1.hp.com/support/files/server/us/download/17028.html.

Regards

Srinath

Mark J. Francisco
Frequent Advisor

Re: Intermodule Bus Error, error code 0x0 on DL380 G3

Hi Srinath -

We have not yet made any hardware changes. We've just ran diagnostics, which came out clean. At this time, we are waiting on an approval from the server owner to upgrade the BIOS. Will let you know how it turns out.

Thanks!
Mark J. Francisco
Frequent Advisor

Re: Intermodule Bus Error, error code 0x0 on DL380 G3

So far so good with the BIOS upgrade. Thanks!
Mark J. Francisco
Frequent Advisor

Re: Intermodule Bus Error, error code 0x0 on DL380 G3

BIOS upgrade seem to have done the trick.