Intermodule bus error.

[luongson]

I has ML 370 server, and when boot in to cd rom smatstart, and a report " INTERMODULE BUS ERROR ".
What happen in ML 370 server ?Help me.

[TY 007]

Hello,

Possible issue with the System I/O Board & might require replacement.

Log a HP Support Ticket to check further.

Thanks

[James ~ Happy Dude]

Hello,

Does the server Works fine ,apart from booting from CD (without CD) ?

If it does, I think it would relate to the DATA CABLES of the CD, try changing them.

regards,
James.

[KarloChacon]

hi

or what about testing using another bootable CD?
like W200-3, linux, .....? the same error?

regards

[luongson]

Thanks all.
Server has report when start window 2003 server, the monitor Green and it Report "THE SYSTEM HAS HALDED " and when booting by CD rom SmarStart for server ML 370 to Run insight Diagnostics but not boot in CD rom smarstart and report " INTERMODULE BUS ERROR "

[KarloChacon]

hi

ml370 G1 g2?

which smartstart version are you using?

and why are you using smartstart CD?
reinstall? get a report?

regards

[KarloChacon]

hi

also any change on the server?

and check this

http://support.microsoft.com/?kbid=222973

regards

[luongson]

ML 370 G3, when boot to windown 2003 is report "HARDWARE MALFUCTION, CALL YOUR HARDWARE VENDOR FOR SUPPORT, THE SYSTEM HAS HALDED " in the green monitor. Boot in smartstart 6.0 is Run insight Diagnostics. But not boot and "INTERMODULE BUSS ERROR "

[James ~ Happy Dude]

Remove any 3rd Party Hardware u may have added.
Remove all PCI cards.
Reboot normally.
Watch out for any amber leds on the system board.

Regards,
James.

[KarloChacon]

hi

so it seems like to you want to check the HW using smartstart due the issue your getting

well try the latest smart for your server?

did you check my link
http://support.microsot.com/?kbid=222973

how many memory modules do you have? 2 - 4 -6

try reseat them, swap them

and tell us

regards