ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Internal LED light RED

 
Dominic Fino
Occasional Visitor

Internal LED light RED

Over the weekend our Proliant ML350 locked up and the Internal LED light was RED. The server was still running but no one could access it. After rebooting the server, the light went out and users could log in as usual. I am trying to understand what caused the problem. I have looked at HP on line and found some references to a possible memory problem. Being new to this business of administering a server, I would like to know if anyone can guide me to the Maintenace Tools or some other tool to help figure out what caused the problem.
Thanks
4 REPLIES
Mike Bollman_1
Respected Contributor

Re: Internal LED light RED

I would check two places here.

1) the system event og (assuming this is a windows box).
2) the HP Integrated Management Log

one or both should give you some information on what is going on with your system.
Dominic Fino
Occasional Visitor

Re: Internal LED light RED

Mike,
Thanks for the reply. I did check the system event log (ues it is a windows 2003 box). There was nothing there to indicate a problem. I did not know about the HP Integrated Management Log. I will look at that first thing in the morning.
Dom

Sung Oh
Respected Contributor

Re: Internal LED light RED

Hello,

you can use following link as your refference doc to check your system internal LED status.

http://www.governmentsecurity.org/articles/articles2/356698-001.pdf_fl/356698-001-62.html

Regards,
Sung
Dominic Fino
Occasional Visitor

Re: Internal LED light RED

Thanks Sung. This will be very helpful.
Dom