Internal System LED

[Hodia Zacharia Hody]

I have ML370 G3 and suddenly from 2 days ago, Internal System LED (next of UID LED) change to RED. When show first the first time, I re-started and it changed to green, but today I restarted again, it still showing RED LED. What should I do?

[David Claypool]

First thing to do would be to check the Integrated Management Log and see if there is any information there to indicate what's going on...

[Hodia Zacharia Hody]

I am novice about this problem. I hired a company to install windows server 2003 into the server. So where I could find Integrated Management Log.

Is it from External Software or Built-in software? and If I don't have it where I could find it and install?

[jinhu]

http://h18007.www1.hp.com/support/files/server/us/download/26020.html

[Jollyjet]

Read the log's and clear it.

[Dmitry_75]

If you have red internal system health led, that you must have any lit led in system board, that very helpful for diagnostic malfunction.

[Hodia Zacharia Hody]

My server has red light in near the memory slot. Could be memory or what?

[Dmitry_75]

If you have several mem modules, try to mix it
in slots, and look result. If lit led move with mem module - replace it, if no -may be system board need to be changed.

[Hodia Zacharia Hody]

what do you mean with system board? is it software or hardware?

[Dmitry_75]

I have no answer, do you try to mix mem modules? All that we talk have hardware issue