ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Internal System LED

Hodia Zacharia Hody
Occasional Contributor

Internal System LED

I have ML370 G3 and suddenly from 2 days ago, Internal System LED (next of UID LED) change to RED. When show first the first time, I re-started and it changed to green, but today I restarted again, it still showing RED LED. What should I do?
9 REPLIES
David Claypool
Honored Contributor

Re: Internal System LED

First thing to do would be to check the Integrated Management Log and see if there is any information there to indicate what's going on...
Hodia Zacharia Hody
Occasional Contributor

Re: Internal System LED

I am novice about this problem. I hired a company to install windows server 2003 into the server. So where I could find Integrated Management Log.

Is it from External Software or Built-in software? and If I don't have it where I could find it and install?
jinhu
Occasional Advisor

Re: Internal System LED

Jollyjet
Valued Contributor

Re: Internal System LED

Read the log's and clear it.
Dmitry_75
Valued Contributor

Re: Internal System LED

If you have red internal system health led, that you must have any lit led in system board, that very helpful for diagnostic malfunction.
Hodia Zacharia Hody
Occasional Contributor

Re: Internal System LED

My server has red light in near the memory slot. Could be memory or what?
Dmitry_75
Valued Contributor

Re: Internal System LED

If you have several mem modules, try to mix it
in slots, and look result. If lit led move with mem module - replace it, if no -may be system board need to be changed.
Hodia Zacharia Hody
Occasional Contributor

Re: Internal System LED

what do you mean with system board? is it software or hardware?
Dmitry_75
Valued Contributor

Re: Internal System LED

I have no answer, do you try to mix mem modules? All that we talk have hardware issue