Is Intel x520 10 Gigabit NIC compatible with ProLiant DL380 Gen9 server?

[KERIM1]

Hi.

I wonder if Intel x520 10 Gigabit NIC is compatible with ProLiant DL380 Gen9 server? I can't find any information/HCL. I have installed it and it is recognized correctly in server's BIOS, but firmware version information is empty, and server start fails with red screen showing CPU registers contents. I have tried ProLiant service pack and it installed NIC drivers, but firmware info is still empty, and start fails again.

If that configuration is supported where can I download drivers/firmware for that NIC model?

Thanks in advance

Kerim1

[Shwetha3]

Hello,

Intel x520 10 Gigabit NIC (Intel® 82599 Controller(Intel® Ethernet Converged Network Adapter X520-DA2)  branded as  HPE Ethernet 10Gb 2-port 560SFP+ Adapter  is compatible on DL380 Gen9 ,   option  #665249-B21

same NIC is also available as a FlexibleLOM Adapter , HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter (option part # 665243-B21 )

Below are the compatible 10gb NIC adapter available for DL380 Gen9 

10 Gigabit Ethernet adapters
HPE Ethernet 10Gb 2-port 530SFP Adapter 652503-B21
HPE Ethernet 10Gb 2-port 530T Adapter 656596-B21
HPE Ethernet 10Gb 2-port 562SFP+ Adapter 727055-B21
HPE Ethernet 10Gb 2-port 546SFP+ Adapter 779793-B21
HPE Ethernet 10Gb 2-port 560SFP+ Adapter 665249-B21
HPE Ethernet 10Gb 2-port 561T Adapter 716591-B21

refer quick specs : 

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04346247

https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00047734enw

[KERIM1]

Thank You very much for reply,

but I mean exactly original Intel (not HPE branded) converged X520-SR2 dual port (82599 chipset) SFP+ NIC. Intel part number G18786-004. https://www.intel.com/content/www/us/en/products/network-io/ethernet/10-25-40-gigabit-adapters/x520-sr2-10gbe.html

On Dell they work just fine. On HP they say: buy HPE NIC. Next time I'll buy Dell server.