ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Issues getting into Intelligent Provisioning - DL360E (Gen8)

 
Diasto
Occasional Contributor

Issues getting into Intelligent Provisioning - DL360E (Gen8)

Hi all,

I'm currently having problems booting into Intelligent Provisioning, I've attempted to re-install using the recovery media (v1.71) and had no luck. Each time it attempts to re-install I'm met with 'Error flashing the NVRAM'.

From there, I've used the service switch with reboot which hasn't changed anything along with flashing the NVRAM via the ILO.

Within the ILO when I check the ILO health I can see; "Controller firmware revision 2.10.00 Embedded media initialization failed due to media write-verify test failure".

Finally, I've installed the latest SPP available to see if this would fix, but also to no avail.

Any help would be greatly appreciated.

3 REPLIES 3
NareshISS
Advisor

Re: Issues getting into Intelligent Provisioning - DL360E (Gen8)

Hello Team,

please collect the AHS report and logged an HPE case for further assistence. its look like some hardware issue.

 

Regards,

Naresh Sharma

I am an HPE Employee.
slavtechbuer
Valued Contributor

Re: Issues getting into Intelligent Provisioning - DL360E (Gen8)

Hi there have you've used Inteligent Provisioning recovery pack 1.61 ?

Also what I would suggest you is to update ILO firmware to 2.61, and make sure that ILO self-test error will not appear.

If it does, you must to run NAND format..

 

Hope that will help.

Kind regards

Slav

Torsten.
Acclaimed Contributor

Re: Issues getting into Intelligent Provisioning - DL360E (Gen8)

>> Also what I would suggest you is to update ILO firmware to 2.61, 

 

Better take version 2.70.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!