ProLiant Servers (ML,DL,SL)
1748002 Members
4504 Online
108757 Solutions
New Discussion юеВ

Issues with HP controller B120i

 
SOLVED
Go to solution
ApolloPT
Occasional Advisor

Issues with HP controller B120i

Hello guys,

I am pretty new with HP server hardware, and I have bough a ml310e to use as a small project, where I pretend to learn more about it.

With this ml310e I have two WD Black 1TB disks, where I am trying to set those with a Raid 1 through the B120i controller, but doesnt madder what I set in bios controller (RAID 0 or 1), when I try to install a OS like lubuntu or debian, it detect both disks like there was no RAID configured, and I am able to create partitions and files on both.

In motherboard BIOS I have set to use that controller as the SATA controller, but still I dont understand how it works. I was expecting that the controller would set it at hardware level, but seems that something is missing between the controller and OS's.

Also in iLO it doesnt detect that controller.

Here it goes some pics of this setup:

http://prntscr.com/gmsbyo

http://prntscr.com/gmscs1

Anyone?

 

 

 

2 REPLIES 2
Jimmy Vance
HPE Pro
Solution

Re: Issues with HP controller B120i

The B120i driver (hpvsa) is a closed source driver and only avalable for specific versions of Red Hat and SUSE.  in RBSU set teh controller to SATA AHCI mode and use mdadm to create RAID for the OS

No support by private messages. Please ask the forum! 
ApolloPT
Occasional Advisor

Re: Issues with HP controller B120i

Thank you for pointing me into the right way Jimmy!