ProLiant Servers (ML,DL,SL)
1748140 Members
3577 Online
108758 Solutions
New Discussion юеВ

Re: Issues with smartstart 5.5 with old DL380

 
dancoffeywsfs
New Member

Issues with smartstart 5.5 with old DL380

I have receive a older compaq DL 380 P1 133MHz. I have tried to creat a boot CD useing the smartstart 5.50. I have had no luck. Looking for some suggestions.
4 REPLIES 4
KarloChacon
Honored Contributor

Re: Issues with smartstart 5.5 with old DL380

what do you mean?
did you get the smartstart CD?

did you burn it?

or you're having issues trying to install windows?

regards
Didn't your momma teach you to say thanks!
Timur S Lukovkin
Regular Advisor

Re: Issues with smartstart 5.5 with old DL380

that is strange because this CD is supported on that server

here is the link...

http://h18007.www1.hp.com/support/files/server/us/revision/9050.html
KarloChacon
Honored Contributor

Re: Issues with smartstart 5.5 with old DL380

do you get any error?

or what?

just in case that is a zip file
you have to unzip it and burn the image that you get using any software to burn CDs


mmmm

regards
Didn't your momma teach you to say thanks!
Hemantha Kumara
Advisor

Re: Issues with smartstart 5.5 with old DL380

Check for the Server CD drive compatible Speed with the CD written speed.
Normally CD which written with 4x and below will read in that drive.
Clean the CD lense and try

Hemanth
Idle Mind is a Devil's workshop.