Jumper positions for Proliant ML150G6

[Karlis_Latvia]

Hi,

I am truly sorry for writing two posts for my problem, but I really need your help.

I have found the Customer Advisory (As seen here: http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01995737〈=en&cc=us&taskId=135&prodSeriesId=3884323&prodTypeId=15351) for my problem (Post: http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1440475).

Can anyone explain, what is the default (or "original") position for BMC Recovery Jumper and what is the Recovery position for this jumper?

Thank you in advance.

[Kranti Mahmud]

Hi Karlis,

Search the below link for your query:

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01728029/c01728029.pdf

Rgds-Kranti

[Karlis_Latvia]

Hi Kranti,

Thank you for your answer, this is a manual for DL160 G6 model, but I have ML150 G6.

I've read the ML150 G6 manual, but I don't see the information I need there.

Still waiting for the solution.

[Sektordj]

I certainly understand that the post is outdated. But I have a question you have finished with this problem! I just have a lot of time I can not understand what my problem! problemma in the following. I put the second CPU cycles on the server and I started vydovat such a mistake, I just have not done, and perestovlyal jumper and a BIOS flash, I had hands opuskayutsya. Please help filter can realties who knows. I perestovlyayu or tidy. J12 it I do not vklyuchaetsya.

Error

System BMC genereric F/W crash or BMC in recovery mode, pleasere flash BMC generic F/W and ensure BMC recovery jmper in pin1 and pin 2 if the recovery jumper not removed from pin2 and pin3 (recovery mode) system will a lwayc in recovery mode and not execute monitor SDR? Fan and thermal function. 

[dmoises594]

I have the same problems with the server, please give me a solution.

[Carlos Badilla]

I've resolved the "System BMC generic F/W crash or BMC in recovery mode please re-flash DMC generic F/W and ensure DMC recovery jumper in pin 1 and pin 2 if the recovery jumper not removed from pin 2 & pin 3 (recovery mode)" error message by re-flashing the Lights-Out 100 Remote Management module. The lastest version for your ML150 G6 can be found here:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3884323&swItem=MTX-408113072d35425783b72dd00f&prodNameId=3884324&swEnvOID=1005&swLang=8&taskId=135&mode=4&idx=1

I've never had to manipulate the recovery jumper to get possitive results.

Regards,

Carlos.

[Ostap]

Your link is not working. 

How can I download the BMC firmware?

[Jimmy Vance]

---

@Ostap wrote:

Your link is not working. 

How can I download the BMC firmware?

---

Got to http://www.hp.com

Select SUpport- Download Drivers

Enter ML150 G6 in the search box under 'Find My Product'

Select your server in the listed results

Select your OS

When the driver list is displayed, select Firmware Management and download the driver