ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

LACP issue with DL360 G4p

Daniele Dorelli
Occasional Visitor

LACP issue with DL360 G4p

Hello,
does anybody know if DL360 G4p supports LACP protocol with HP Procurve 2524 switches?

They don't recognize it as a LACP partner, as shown above:

PORT LACP TRUNK PORT LACP LACP
NUMB ENABLED GROUP STATUS PARTNER STATUS
---- ------- ------- ------- ------- -------
1 Passive 1 Up No Success
2 Active 2 Up No Success
3 Active 3 Down No Success
4 Active 4 Down No Success
5 Active 5 Up Yes Success
6 Active 6 Up Yes Success
7 Active 7 Up Yes Success
8 Active 8 Down No Success
9 Passive 9 Up No Success
10 Active 10 Down No Success
11 Active 11 Down No Success
12 Active 12 Down No Success
13 Passive 13 Up No Success
14 Passive 14 Up No Success
15 Passive 15 Down No Success
16 Passive 16 Down No Success
17 Passive 17 Down No Success


it's linked on port 2.

On ports 5,6 and 7 I have connected three DL380 G4 with the network cards in TEAM, the same configuration and drivers of the DL360.

But it doesn't work, the switch cannot see it as an LACP partner.

I also tried to substitute the ethernet cables, I changed the ports on the switches but with no result.

Any suggestions or solutions?

Thanks in advance for attention.
Regards.
1 REPLY
Daniele Dorelli
Occasional Visitor

Re: LACP issue with DL360 G4p

I solved my problem, it depended on a wrong configuration on the ethernet cards of the TEAMing protocol.

Bye.