ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

LED's don't blink on iLO port

 
donkarnash_1
Frequent Advisor

LED's don't blink on iLO port

Hi, I have ML570 G3 server connected to the network but the led's are not blinking. I have made sure I set a static IP address and enabled iLO and pressed F10 but the led's are not on.
But when I plug a laptop to the iLO port, the led's are blinking. can anyone advise what I might be doing wrong. thanks
3 REPLIES
KarloChacon
Honored Contributor

Re: LED's don't blink on iLO port

hi

which LEDs are not working ilo or NICs? or both?

is ilo connecting? is networking working?

bye
Didn't your momma teach you to say thanks!
donkarnash_1
Frequent Advisor

Re: LED's don't blink on iLO port

Karlo,
The iLO led's are not flashing. Also when I connected the NICS to the network, I see lots of transmit errors on the stats for those NICS
KarloChacon
Honored Contributor

Re: LED's don't blink on iLO port

ok

what's the status for ilo in system management homepage?

most important can you ping? can you remote ilo? do you get F8 for ilo during POST? have you tried setting the IP settings again?


for the NICs
have you installed latest drivers?
are you using network configuration utility(any NIC teaming )?

bye
Didn't your momma teach you to say thanks!