ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Large Lun support for NT4 connected to RA4100

Ayman Altounji
Valued Contributor

Large Lun support for NT4 connected to RA4100

System: Dual PL1850R with single Fibre Channel Host Bus Adapter/P each connected to a RA4100 system. Running MS Cluster on NT 4.0 Enterprise.

Is there support for more than 8 LUNs on this FC HBA? Checked the LargeLuns utility in compaq.com/storage, but this reflects to the EMA systems using the Emulex adapter. Tried similar registry setting for cpqfcalm.sys with no luck. Any idea?

Best regards, Einar Rike
1 REPLY
Ayman Altounji
Valued Contributor

Re: Large Lun support for NT4 connected to RA4100

Just got a message from Compaq Support stating that Large LUNs are not supported on RA4100 - maximum 8 LUNs allowed.