Lights-out (iLO) board not working

[GVB]

Hi,
On a RX3600 server, the iLOboard is not working, ipadres https://0.0.0.0. Networking cable is plugged (leds are on), find not a hponcfg on the systeem (windows 2003 64-bit). How can i make it works? I try to start the HP Support Pack but he doesn't display information about the iLO board.
So how can i make it works, w software do i need to install or what els can i do to make it work.
Thanks for support, regards
Marcel

[Matti_Kurkela]

Please Read the Fine Manual:

http://docs.hp.com/en/AB463-9001C/ch01s07.html

You'll need to attach a terminal (or a computer with a terminal emulator software, like Hyperterminal) to the serial port of the iLO MP. You must use this to set the network parameters.

Be aware that although this is called iLO, it is not quite the same as the iLO on Proliant servers. The iLO MP of the rx series servers is more related to the GSPs and MPs of the earlier HP-UX PA-RISC servers.

MK