HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Lights-out (iLO) board not working


Lights-out (iLO) board not working

On a RX3600 server, the iLOboard is not working, ipadres Networking cable is plugged (leds are on), find not a hponcfg on the systeem (windows 2003 64-bit). How can i make it works? I try to start the HP Support Pack but he doesn't display information about the iLO board.
So how can i make it works, w software do i need to install or what els can i do to make it work.
Thanks for support, regards
Honored Contributor

Re: Lights-out (iLO) board not working

Please Read the Fine Manual:


You'll need to attach a terminal (or a computer with a terminal emulator software, like Hyperterminal) to the serial port of the iLO MP. You must use this to set the network parameters.

Be aware that although this is called iLO, it is not quite the same as the iLO on Proliant servers. The iLO MP of the rx series servers is more related to the GSPs and MPs of the earlier HP-UX PA-RISC servers.