HPE Community
ProLiant Servers (ML,DL,SL)
1753488 Members
4784 Online
108794 Solutions
New Discussion

Link Down on 556FLR-T Adapter in G9 DL380

 
NotaRobot
Occasional Visitor

‎10-15-2017 10:24 PM

‎10-15-2017 10:24 PM

Link Down on 556FLR-T Adapter in G9 DL380

I have 2 identical G9 DL380 servers. They are both configured the exact same way. But on one port 2 on the 556FLR-T Adapter shows as link down, And I cannot get it to show as 10GBps. In iLO is shows the port as unknown and in system configuration it says link down. And VMware also shows the link as down.  I dont see this as a VMware issue sinceIt shows as down before it even boots into the OS.

I have tried firmwares, new cables, HPE has replaced the system board and the NIC and are pretty much just throwing parts at it. its truely furstrating.

Has anyone seen this before?

0 Kudos
Reply
1 REPLY 1
Erik70
New Member

‎03-20-2018 03:55 AM

‎03-20-2018 03:55 AM

Re: Link Down on 556FLR-T Adapter in G9 DL380

Seem to have same kind of situation. Is there any solution found?

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.