ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Link error detected by expander

Link error detected by expander

Folks;
on my Proliant DL320s with P400 disk array, when rebooting i got this error:

Box1: storage enclosure problem detected
Link error detected by expander

Any help?
3 REPLIES
Gary Antonio Benavides
Trusted Contributor

Re: Link error detected by expander

What is the POST Error Code? 1777? There is no external storage systems connected to the controller, right?
If it's not fun, you're not doing it right

Re: Link error detected by expander

The code is 1777.
I don't have any external storage
Gary Antonio Benavides
Trusted Contributor

Re: Link error detected by expander

The POST Error 1777, can be generated as a result of a number of causes, including loose SCSI cables, bent cable pins, miss-attached SCSI cables, out of date firmware, and improperly seated boards. Can you run the Array Diagnostic Utility and attach it to that Forum?, just to check it. If possible reseat the storage controller, backplane and cables and check for bent pins.
If it's not fun, you're not doing it right