Linux Installation on BL20p G2

[Khurram Shahzad]

I have intsalled Linux AS4 on BL20p G2 server, i have another server BL20p G2 with same specs only difference in number of RAM modules.

I tried to use the Linux hard disk into the second machine i pulled them from the first and inserted them into second but when i power on the server it doesn't boot.

I think logically the harddisks should work in both the machines if the have same architectures. can any one tell me y its not working.

[pymsh · Accepted solution]

hi Khurram Shahzad!
If your HDD's on the first server are mirrored, you can take one of the mirrored HDD's and pull it into the same location on second server without inserting the other HDD.
After booting server, you can insert another HDD into the other location to make HDD's mirrored.
Difference in amount of memory modules is not a architectural difference between your servers, so OS's must be the same configuration on those servers.

[Khurram Shahzad]

It worked thanks.