Logical drives and windows 2003

[Ian Warner]

I have just installed windows 2003 standard r2 on a DL380 G5.
The drives were configured as
logical drive a - drive 1&2 raid 0/1
logical drive b - drive 5,6,7 as raid5
logical drive c - drive 3,4 raid 0/1.

Windows was installed in onto logical drive a. Under windows this shows as drive c: and I cannot see any of the other logical drives.
How do I configure/see the other drives?

[Rob Leadbeater · Accepted solution]

Hi Ian,

Right click on My Computer, and click on Manage. Click on Disk Management and you should hopefully see the two additional logical drives which will be unformatted.

Select each one in turn, add a partition and format it...

Hope this helps,

Regards,

Rob