HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Logical drives and windows 2003

 
SOLVED
Go to solution
Ian Warner
Trusted Contributor

Logical drives and windows 2003

I have just installed windows 2003 standard r2 on a DL380 G5.
The drives were configured as
logical drive a - drive 1&2 raid 0/1
logical drive b - drive 5,6,7 as raid5
logical drive c - drive 3,4 raid 0/1.

Windows was installed in onto logical drive a. Under windows this shows as drive c: and I cannot see any of the other logical drives.
How do I configure/see the other drives?

Why did anyone invent unix?
1 REPLY
Rob Leadbeater
Honored Contributor
Solution

Re: Logical drives and windows 2003

Hi Ian,

Right click on My Computer, and click on Manage. Click on Disk Management and you should hopefully see the two additional logical drives which will be unformatted.

Select each one in turn, add a partition and format it...

Hope this helps,

Regards,

Rob